SOLAREZ UV Cure Clear Casting Resin Pint for DIY Jewelry, Hobby, Craft, Making ~

Description

SOLAREZ UV Cure Clear Casting Resin Pint for DIY Jewelry, Hobby, Craft, Making ~
Solarez Clear Casting UV Cure Resin
is Clear Casting Resin and Catalyst all in one! Its a water-clear, UV curable clear polyester casting resin that will cure by either exposure to sunlight in roughly 3 minutes or by adding MEKP catalyst the old-fashioned way, hardening in 30 minutes. Either way, you can quickly make beautiful clear-cast parts with Solarez.
Product Tips
: UV casting of parts takes into consideration many things; amount (mass) of resin to be cured, ambient temperature and surface contour of the part you want the resin to cure around. If [UV] light can reach all surfaces of your part and all the resin in the casting, you can "solarcure" with UV light only and it will take about 5 minutes - even at temperatures of -20�F. Slightly longer than with direct sunlight. WOW !! That's incredible! However, if your part has dark colors or contours that shadow light penetration, you can "dual cure" by premixing a mild amount (1%) of MEKP catalyst. The sun or artificial UV light will cure whatever areas of resin are exposed to the UV radiation and the resin will rapidly cure and gently exotherm, warming and accelerating the other shadowed areas that are bathed in the mildly catalyzed resin. Any ODOR should completely dissipate after the product is fully cured. You could also add the standard 2% dose and cure completely cure by MEKP in the shade just like the old-fashioned way and it will yield beautiful results in temperatures between 55�F to 90�F. Below that; it will cure tediously slow or not at all.
Unlike other Solarez products, Casting is NOT odorless and requires reasonable ventilation until cured. ALL Polyester resins will give off this type of odor. Clear Polyester resins are not possible without it. However, the odor ceases with curing.
- Solarez UV Cure Clear Molding and Casting Resin
- Cures with Exposure to the Sun or UV Light! - Cure Exceptionally Dry - unlike other UV cure resins that cure tacky. (ideal UV light = 385nm)
- Water-Clear, UV Curable Polyester Resin - NOT Doming Resin - see our Doming Resin Products on .
- Cures by Exposure to Direct Sunlight in roughly 3 minutes or by adding MEKP catalyst the old-fashioned way, hardening in 30 minutes. UV Cure Lights at 385nm Cure in 5 mins (not all UV lights are in ideal range).
- Solarez since 1985 - Made in the USA!
- PRODUCT HAS ODOR - SEE VAPOR CONTROL VIDEO.
SOLAREZ CLEAR, UV CURE, MOLDING & CASTING POLYESTER RESIN � SUPER FAST CURE! � 3-5 MIN per 1/2 inch of resin w/ SUNLIGHT or 25-30 MIN w/ 2% MEKP CATALYST (MEKP INCLUDED but only required for projects deeper than 1/2 inch. Cure times in Sunlight may vary based on geographic placement above the equator, season and weather.
- CURES EXCEPTIONALLY DRY IN THE SUN - Sun Cures with Clear Molds up to Three Quarter-inch Thickness. � For thicker molds or difficult casts add 2% MEKP. Casting w/MEKP is still much faster than epoxy resins - average of 25-30-minute curing time. READ Product Card and Instructions CAREFULLY.
- UV CURABLE POLYESTER RESIN VENTILATION REQUIREMENT! - ALL Polyester Resins Have a Distinctive Styrene Odor. Use in Well Ventilated Area. No odor given off after fully cured.
- MONEY BACK GUARANTEE ON ALL SOLAREZ PRODUCTS! Problem? EMAIL or CALL US!
- SOLAREZ - Made in the USA � SINCE 1985 � Used by Professional Artists Worldwide
- PRODUCT HAS ODOR - SEE VAPOR CONTROL VIDEO.
SOLAREZ CLEAR, UV CURE, MOLDING & CASTING POLYESTER RESIN � SUPER FAST CURE! � 3-5 MIN per 1/2 inch of resin w/ SUNLIGHT or 25-30 MIN w/ 2% MEKP CATALYST (MEKP INCLUDED but only required for projects deeper than 1/2 inch. Cure times in Sunlight may vary based on geographic placement above the equator, season and weather.
- CURES EXCEPTIONALLY DRY IN THE SUN - Sun Cures with Clear Molds up to Three Quarter-inch Thickness. � MEKP Included but NOT REQUIRED! For thicker molds or difficult casts add 2% MEKP. Casting w/MEKP is still much faster than epoxy resins - average of 25-30-minute curing time. READ PRODUCT INSERT and/or WATCH VIDEOS BEFORE USING.
- UV CURABLE POLYESTER RESIN VENTILATION REQUIREMENT! - ALL Polyester Resins Have a Distinctive Styrene Odor. Use in Well Ventilated Area. No odor given off after fully cured. All UV Polyester Resins have this odor of Nail Polish. But it is the only way to shorten cure times and speed up projects.
- MONEY BACK GUARANTEE ON ALL SOLAREZ PRODUCTS! Problem? EMAIL or CALL the Solarez Corporate Office for Assistance.
- SOLAREZ - Made in the USA � SINCE 1985 � Used by Professional Artists Worldwide. READ ALL INSTRUCTIONS and WATCH VAPOR MANAGEMENT VIDEO. See Monjiardo Studios website for pro product use examples.
- PRODUCT HAS ODOR - SEE VAPOR CONTROL VIDEO. SOLAREZ CLEAR, UV CURE, MOLDING & CASTING POLYESTER RESIN � SUPER FAST CURE! � 3-5 MIN per 1/2 inch of resin w/ SUNLIGHT or 25-30 MIN w/ 2% MEKP CATALYST (MEKP INCLUDED but only required for projects deeper than 1/2 inch. Cure times in Sunlight may vary based on geographic placement above the equator, season and weather.
- CURES EXCEPTIONALLY DRY IN THE SUN - Sun Cures with Clear Molds up to Three Quarter-inch Thickness. - Add 2% MEKP for thicker molds or difficult casts. Casting w/MEKP is still much faster than epoxy resins - average of 25-30-minute curing time.
- PRODUCT HAS ODOR - SEE VAPOR CONTROL VIDEO.
SOLAREZ CLEAR, UV CURE, MOLDING & CASTING POLYESTER RESIN � SUPER FAST CURE! � 3-5 MIN per 1/2 inch of resin w/ SUNLIGHT or 25-30 MIN w/ 2% MEKP CATALYST (MEKP INCLUDED but only required for projects deeper than 1/2 inch. Cure times in Sunlight may vary based on geographic placement above the equator, season and weather. Key Product Features
- CURES EXCEPTIONALLY DRY IN THE SUN - Sun Cures with Clear Molds up to Three Quarter-inch Thickness. � For thicker molds or difficult casts add 2% MEKP. Casting w/MEKP is still much faster than epoxy resins - average of 25-30-minute curing time.