PEGGAS Cold Water Pressure Washer 3000PSI 2.5 GPM 7/8" Vertical Pump Shaft

Description

PEGGAS - Blast away all Dirt, Grime, away forever!
PEGGAS - High-Quality Aluminium Horizontal Pressure Washer Pump!
The Perfect Accessory For Anyone Who Pressure Washes! You Will Never Want Any Other Brand Following The High-Quality You Will See In All PEGGAS Accessories!
PEGGAS PWV(R)28/2.5 Technical Specifications Sheet!
Fits many models:
Fits: BM802711, BM802823, BM80920, GC80747, GC80922, HL80833, HL80835, HLCA80710, HU80709, HU80709A, HU80714, HU80715, HU80722, HU80722A, HU80833, HU80833A, HU80911, HU80911A, HU80915, HUCA80709A
Fits: RY802900, RY803000, RY80930, UT80709, UT80835, UT80911, UT80911A, UT80709A, UT80933, UT80993A, UT80993B, UT80993D, UT80993E, UT80993F, WF80710, WF80911
Fits: PS262311, PS80943, PS80944, PS80946, PS80946A, PS80946B, PS80947, PS80947,PS80950, PS80979, PS80979A, PS80979B, PS80995, PS80995A, PS80995JA, RY802700, RY802700A, RY8C2700, RY802723, RY802800
Nothing is worse than having to return a product, trust us…we get it. Let’s work together to avoid this! If you are unsure as to whether or not this is the correct product for your unit, please ask. If you seek assistance
we will need as much of the following information as possible
, if applicable, to help you find the product you are looking for:
Model
Spec and/or Type Number
Code and/or Serial Number
Year
Learn about our High Quality Brass Vertical PEGGAS PUMP!
Vertical 7/8" Engine Shafts ONLY
GASOLINE PRESSURE WASHER VERTICAL PUMP - High-quality replacement pump for your pump. These are OEM replacement pumps for many models of pressure washers. If your old one stopped working, is corroded etc. don’t hesitate!
PARTS COMPATIBILITY - THIS IS MADE FOR A VERTICAL ENGINE WITH A 7/8" SHAFT - Models stated in the listing are potential matches only and NOT a confirmation of compatibility.
PEGGAS Pump Measurements
Mounting Bolt Measurement - From main center shaft to each mounting bolt is 4" - center to center spacing between mounting bolts is: 7 1/2" – 6 1/4" - 6 1/2"
IMPORTANT FITMENT - This pump comes with a standard 7/8” shaft which is universal for all small pressure washers. Hose connecters are standard M22 so you don’t have to worry about buying extra fittings. Your 5.5-6.5 HP engine will power this pump with no problem and bolt on directly!
PEGGAS Pump Measurements
Length: 8 1/16" (Inches) Length
Height: 6 1/4" (Inches) tall
Learn More About The PEGGAS Vertical Pump With Our Diagram!
FITMENT - This pump comes with a standard 7/8” shaft which is most common for all small Vertical pressure washers.
Discharge Ports (1): 22mm Twist Connect (High-Pressure Hose)
Inlet Ports (Garden Hose): 3/4" Garden Hose Thread
Comes with Built-In Unloader
Built-In Chemical Injector
Comes with a FREE Thermal Relief Valve
How to Install and Use Our PEGGAS Vertical Pressure Washer Pump!
7/8" Inch Vertical Shaft!
PUMP SPECIFICATIONS:
Type: Axial
Head Material: Forged Brass
Engine HP required: 5.5 HP (Minimum)
Max. Water Supply Temperature: 104°F
Self-suction: Yes
Pre-Oiled Ready to go!
7/8" Vertical Shaft Pump Mounted!
When installing, please ensure that the keyway is installed before running your pressure washer.
Allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up!
7/8" Vertical shaft pump in ACTION!
Max. Volume: 2.5 GPM Max.
Pressure Output : 3100 PSI Max.
Pump Speed: 3450 RPM
Allows for a large area of coverage and with all that cleaning power, Blast away all Dirt, Grime, away forever!
PEGGAS
Find Out About Our PEGGAS Product Line