NEW - Pressure Washer Pump - 3/4" - 2700-2900 PSI 2.5 GPM -Premium - Cold Water

Description

PEGGAS - Blast away all Dirt, Grime, away forever!
PEGGAS - High-Quality Aluminium Horizontal Pressure Washer Pump!
The Perfect Accessory For Anyone Who Pressure Washes! You Will Never Want Any Other Brand Following The High-Quality You Will See In All PEGGAS Accessories!
Learn about our High Quality Aluminum Horizontal PEGGAS PUMP!
Horizontal Engines with 3/4" Shafts ONLY
FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
Shaft Depth: 2 5/8"
Hole Distance to hole - 2 9/16”
Keyway Size: 3/16"
PEGGAS Pump Measurements
Height: 7 1/2" (Inches) tall
Width: 5 5/16" (Inches) wide
PEGGAS Pump Measurements
Length: 8" (Inches) Length
PEGGAS PW28/2.5 Technical Specifications Sheet!
Fits many models:
Homelite 308653057, 308418007, UT80522, UT80953, UT80522B, UT80953B, UT80522A, UT80953A, UT80522D, UT80522E, HL252300 - Powerstroke 30841800, PS80522, PS80903A, PS80903B - Delta DXPW3025 - Karcher MH5500H-1 M5500H-2 M5500H-3 , Karcher G3050OH - Generac 308418007 HL252300, Generac 01675, 01675-0, 1675, 1675-0, G24H - Troy-Bilt 020241, 020242, 020241-0 - Comet BXD2528, BXD2527G - Craftsman 580.752600 580.752601 - Generac AXD2524GT-22MM, AXD3025G - Simpson MSH3125, MSH3125-S - Annovi Reverberri SJV25G27D-F7-EZ, AR MV25G30D - OEM Technologies FNA520002 (SIMPSON 520002) - AR North America RMV25G30D-PKG, RMV25G30-EZ-PKG
Engines: OEM Himore 309515003 Engines, Honda GC160 Type P, Honda GC190
AND many other models.
(Does Not Fit Excell engine's w/ 7/8" shaft )
THIS PUMP IS EXCLUSIVELY FOR HORIZONTAL ENGINES WITH A 3/4" SHAFT
Shaft Diameter: 3/4" Keyed Hollow Shaft
THIS PUMP WILL ONLY FIT A HORIZONTAL ENGINE w/ 3/4 Shafts
,
NOT A 7/8 SHAFT & NOT VERTICAL ENGINES.
Models stated in the listing are potential matches only and NOT a 100% confirmation of compatibility. The customer is responsible for verifying their compatibility (our pump with their machines)***
Fits Honda Excell units with 3/4 shaft only!!! Some Excell units have the 7/8 shaft and this pump will not work!
**
Learn More About The PEGGAS Horizontal Pump With Our Diagram!
FITMENT - This pump comes with a standard 3/4” shaft which is most common for all small Horizontal pressure washers.
Discharge Ports (1): 22mm Twist Connect (High-Pressure Hose)
Inlet Ports (Garden Hose): 3/4" Garden Hose Thread
Comes with Built-In Unloader
Built-In Chemical Injector
Comes with a FREE Thermal Relief Valve
How to Install and Use Our PEGGAS Horizontal Pressure Washer Pump!
3/4 Inch Horizontal Shaft!
PUMP SPECIFICATIONS:
Type: Axial
Head Material: Aluminum
Engine HP required: 5.5 HP (Minimum)
Max. Water Supply Temperature: 104°F
Self-suction: Yes
Pre-Oiled Ready to go!
3/4" Inch Horizontal Shaft Pump Mounted!
When installing, please ensure that the keyway is installed before running your pressure washer.
Allow water to flow freely through the pump until all air is out of the lines before firing the pressure washer up!
3/4 Inch Horizontal shaft pump in ACTION!
Max. Volume: 2.5 GPM Max.
Pressure Output : 3000 PSI Max.
Pump Speed: 3450 RPM
Allows for a large area of coverage and with all that cleaning power, Blast away all Dirt, Grime, away forever!
PEGGAS
Find Out About Our PEGGAS Product Line