Hydra-Guard® Single Station Leak Controller System For POE Water Appliances

Description

Monitors & Protects Against Major Water Appliance Leaks
Old point-of-entry (POE) water appliances and pipes are prone to leak or burst, wasting water and causing damage to your home. APEC's Single Station Leak Detector/shut-off device is an active point-of-monitoring leak detection system that notifies homeowners with an alarm signal and automatically shuts off the water supply within a few seconds of a developing leak at a single monitored location. The quick detection and shut off capabilities of this system helps prevent more water from flowing and causing further damage and makes for a great low cost insurance policy for higher risk installations.
A smart home leak prevention system, the Single Station Detector is equipped with the latest technology to monitor and control water flow to primary appliances. It consists of one motorized 1" brass ball valve with manual override wired with 1 sensor on the ground to close the water supply whenever a leak is detected. The system works either on batteries or electricity and can also run self-tests and indicate when battery replacement is needed.
Designed to be used on all critical water appliances:
Water heater
Water softener
Toilets
Dishwasher
Humidifiers
Lavatories
Refrigerators
Washing Machine
Water Filtration Systems
Sink
Garage
Fish Tank
Basement
Sump Pump
House Plants
Industrial Coffee Machines
Ice maker or water dispensers on refrigerators
Product Features
Fully automatic wireless R/F unit
Battery or electrical operated
1 motorized 1" NPT full port brass ball valve
Manual override on valve
1 wired disc
Low battery indication
Run self-tests
Holiday function
Audible and visual alarm indication
Sensor Disk
The water-resistant sensor disk is equipped with 3 moisture detection probes capable of detecting water flow from 1 mm to direct contact with the floor. This state of the art technology allows the system to quickly shut off the water at the earliest sign of a leak to protect against water damage to your home and possessions.
Whole House Water Detecting System Specifications
Model
LEAK-DETC-WHG
Total Weight
4 lbs
A) Valve Section
Design
1" Full Port Brass Ball - Nickel Plated
Working Pressure
PN16 (250 psi), 17,24 Bar
Working Temperature
+21°F to +248°F
Belangrijk
Not for Natural Gas or LPG
Thread on Valve
1" Threaded Female ends BSP
Fittings
2 Brass fittings converting 1" BSP to 1" NPT Female Adaptors
Top Section on Valve
Design
Motorized unit with manual override wheel
Buttons & LED Lights
Membrane keypad label with 3 LED's
Buzzer
Integrated
Working Temperature
-49°F to 185°F
External Extension
Insert Kraan: RJ 6 Pin type Modular Jack; Insert Socket: RJ 6 Pin type Modular Plug
Power
4 x (1, 5V) AA Alkaline batteries and/or 1 universal world adapter with interchangeable plugs switching connectors
Input Power
100-240V; AC~50/60Hz
Output Power
6, 0VDC-1, 0A
B) Sensor Section
Design
Wired round shaped disc screw model
Wire
2 core flexible cable
Wire Cord to Top Section on Valve
Max. 92.5"
Working Temperature
-49°F to 185°F
Water Resistant
Yes (rubber o-ring & patch)