Bobble head Display case Metallica with Flaming Skull & Flying Stars

Description

If you want more than one of the same item made let me know  so I can re -list the item in question
PLEASE READ
THESE ITEMS MUST BE MADE.
The logos are  airbrush / paint the logos on.
These items are handcrafted and take app 25 hours / a week to make.  Timeframe to be shipped can take up to 2 to 3 weeks depending on current orders. I'm a one man operator working out of my house.
These are custom  made, if you want any changes let me know as far as logos or color . On some of my listing there may be other paper layouts to choose from.
This item can be made for any team, or sport, or any other bobble head theme.
If you need in a timely manner let me know. Thank you for viewing my items.
BOBBLE HEADS NOT INCLUDED
There may be pictures of bobble heads in the pictures. These were send buy other buyers pleased with their item.
BOBBLE HEAD DISPLAY CASE
Bobble heads Display Case, this item is made to look like a Dugout.  I can make this item for any MLB Team. This can be made for any other sports.  You will see in my store there are a few for Football .This item is made to hang on a wall or it can be set on a table or shelf.
CONSTRUCTION
The display case is made from 3/4 Pine wood for the most part.  The Roof & Floor is made from 3/16 plywood
LOGOS & LETTERING
THE TOP LETTERING
The top lettering (The name of Team and or City)  in most case is 1 7/8 inches high, depending on the length, down to 1 1/2 inches high. The over all length is 21 1/2 inches giving me app 19 inches of painting space.
INSIDE
In most cases I like to fill up the inside with logos.
On a 3 logo display. The inside end logos  are app 5 inches high. The center logo is app 6 to 8 inches high
On a 2 logo display.  The logos are app 6 inch 7 inches
THE LOGOS & LETTERING
The logos & lettering is airbrushed / painted on.  It is finished off with four coats of Crystal Clear Enamel.
MEASUREMENTS
This item is made from 3/4 pine wood & 3/16 plywood. The Roof & Floor is 3/16 plywood. The measurements app. + or - a 1/4 inch
The over all case is 21 1/2 inches long x 13 1/2 inches high x 10 inches wide
The top part of the case where is reads "the name of the team or city" is 3 1/4 inches high 21 1/2
The box is 8 x 10 1/2 x 21 1/2
The inside box is 10 x 7 1/4 x 20
The Bench / back shelf is 2 1/4 high  3 1/2 wide  19 long ( in most cases depending on the center logo the bench may be  1 1/2 high )
The Floor inside is  9 1/4 x 20
The Roof is  8 1/4 x 21 1/2
The handrail is 3 1/2 x 19
COMES ASSEMBLED
This item comes ASSEMBLED. The handrail  was screwed on then removed for shipping.
I will give all hardware to hang on your wall.  Hooks,  Screws & Instructions.
This item was made to hang on a wall but if you decide to set on a book shelf or table. I will give you scratch resistant pads.
Once ordered I will be asking you this question;
Is this going to be a WALL HANGING  or  TABLE TOP  DISPLAY.   The hanging hardware and the scratch resistant pads cost me the same.  So I would like to know how this will be displayed.  Table top or wall hanging so I can send you the proper hardware.
A STANDARD BOBBLE HEAD
A standard bobble head is 3 inches round & 7 inches high.
On the bench you can fit 6 bobble heads. In front of the bench another 12.  In total app. 18 in all.
You can also use the roof to display bobble heads.  You can fit app 12 on the roof.
EXTRA FEATHERS ARE AVAILABLE   (IF NOT IN THE MAIN TITLE)
EXTRA FEATHERS  To see other dugouts with sliding doors or stained look in my store.
Sliding doors   2 plexi-glass sliding door.  The sides are a little wider 7 1/4 to 9 inches   extra cost .00
Stained if you want this item stained on the inside is .00 extra  I will need to know the color
Green Felt for the floor.  The floor will be covered in green felt to give it a grassy look.  extra cost .00
CUSTOMIZED DISPLAY CASE
I don't have all MLB teams made, so if you want to see a paper layout for a team I don't have I will make you some layouts to choose from. This service is FREE.  These can also be made for other sports & teams. just ask.
SHIPPING AND HANDLING TIME
You will see I added .95 to the handling fee.  The handling fee covers the shipping box, packing, tape etc..
The weight of this item is 12 to 15 pounds depending on the dryness of the wood. The box is costumed made 22 x 18 x 12
JIMWOOD
A little about me. As of Dec 2019 I'm 57 years old and in good health. I live alone / widower.  I work out of my home. My shop is my basement & kitchen.  I'm a one man operator meaning I work alone.  I been a wood worker for over 35 years. I work 5 days a week app 14 to 16 hours a day.  Weekends I don't work, I do my housework.
I have all my items on a `15 day handling time.  Most of my small items take under 8 hours / 3 days to make.
( three days meaning time for the paints & glues to dry )   Larger items take up to 15 to 25 hours / a week to make.  I'm a one man operator and at times I get over loaded with orders.  If you need an item in a TIMELY MANNER let me know. Having my items at 15 day handling time give me freedom to move orders around to meet your needs.