A/C Alarming Air Refrigerant Halogen Leak Detector Tester HFC CFC Checker Tools

Description

Alarming Car Air Condition Refrigerator Halogen CFC HFC Gas Leak Detector Freon Analyzer Tester Checker
Condition:
100% new
Color:
Dark Grey & Silver
Material:
Plastic & Metal
Handle Size:
approx.17x4.6x4.6cm(6.69x1.81x1.81inch)(LxWxT)
Probe Length:
approx.20.8cm(8.19inch)
Item included:
1 x Halogen Leak Detector with Probe
1 x Instruction Manual
Compatible With: fit for all car
This Is Aftermarket Replacement Item But Not Genuine
Note:
1) All dimensions are measured by hand, there may be small deviations.
2) Color may vary slightly due to the color setting of each individual monitor.
3) Make sure that the leak environment is free of wind to avoid the leak gas blowing away from the leak source.Alarming and false inspection will occur.
4) Detect and repair the big cranny,then detect the tiny one when they coexist.
5) Avoid the contact with the moist and impregnate in case of alarming.
6) Long time use of the batteries will influence the stability of the tool and false alarming.
Product Dimension:
Feature:
1) Detect all halogen refrigerants.
2) Sensitive manual adjusting function makes it convenient to use.
3) Well-designed and exquisite circuit.
4) Sound and light alarming indicator.
5) Excellent senor to detect subtle leak halogen gases.
6) Flexible long handle to detect leak source at any place.
Operation:
1) Install four cell size 7 alkaline batteries.
2) Red indicator light show the instrument in working state.
3) Balancing adjusting:Detect the leak when it sounds click,click in a adjusting.
4) Examine the refrigerant system to discover the cranny and eroded places first and pay prior attention to such places.
5) No contact between the dirty places and sensing tip.User dry towel and compressor to make it clean instead of the use of detergent to avoid the chemical reaction.
6) Following the coherent route to detect in order to avoid omission of leaks.Remember to detect the rest places after finding a leak hole.Sensing tip should move at the speed of 25-50mm/s with a distance of no more than 5mm around the every place to detect in order to attain the best inspection result.A roaring stands for a leak detected.
7) Take the tool away and readjust the sensitivity handle to reach the maximum sensitivity.Inspect the place again carefully and confirm and exact place of leak.You are recommended to adjust the sensitivity as often as you can and shut up the tool when finishing the detect to prolong the life longevity of batteries and avoid the alarm in the state of maximum sensitivity.
Application Range:
1) Detect leaks in air-conditioner and other refrigerant systems.It will respond all halogen gases(including Chlorine and Florine),which include but are not limited to:
CFCs: R1, R11, R500, R503...
HCFCs: R22, R123, R124, R502...
HFCs: R134a, R404a, R125...
2) Detect ehylene Oxide gas leaks in hospital sterilizing equipment(it will detect the homogenate carrier gas).
3) Detect SF-6 in high voltage circuit breakers.
4) Detect most gases including Chlorine,Fluorine and Bromine(Halogen gases).
5) Detect cleaning agents used in dry cleaning applications such as perchlororthy.
Performance:
Power Supply:Dc6V size Alkaline batteries(4)
Battery Life Expectancy: About 50 hours
Max sensitivity: 14grams/yeas
Warm-up time: 6 Seconds
Reaction time: Instantanerous